Home > Application / markct

Model Query
Inner diameter:  
Outer diameter:  

Bearing mounting and removing in skates


Bearing mounting and removing in skates

Mounting instructions
 The following instructions concern inline skates, quads, skateboards and scooters. Two bearings separated by a spacer are mounted per skate wheel. Whatever the shape and size of the spacer, the bearings are mounted in the same way.
.Removing instructions
Bearings must be removed carefully; otherwise there is a risk to destroy them or to make them dirtier than they were before. Bearings should be removed in following cases:

Change or interchange wheels when worn
Change when wheels are blocked or rolling badly
Re-lubricate the bearings
Clean the bearings.
Important observations: in-line or skateboard or quads wheels are not designed for easy bearing removal. So, if you remove them without care, there is risk to damage the bearing raceways. To do it properly recommends to use a bearing press (see photo). If you don't have it, the only way to remove the bearings is to use a handy tool with a hook at one end (see photo).

Here are examples of 2 cases for different axle diameters.

Axle of 6 mm diameter:

Push on the spacer
That will push out the opposite bearing
Extract the spacer
Hook the inner diameter and extract the second bearing.
Axle of 8 mm diameter:

Hook the inner diameter of a bearing and extract it
The spacer comes out easily hook the inner diameter of the second bearing and extract it

Tel:+852 5601 0666
Whatsapp:+852 5382 3545
Add:Silvercorp Intl Tower, Mongkok, Hongkong.
In order to better provide products and services to your e-mail to usE-mail

Contact us