Home > Bearings Type

Model Query
Inner diameter:  
Outer diameter:  
Joint bearing is mainly composed of a spherical outside surface of the inner ring and the outer ring of a spherical in the composition, can bear larger load. Joint bearing is spherical plain bearings, according to its structure and types, can bear radial load, axial load, or combined with radial load, axial and effect. Because the spherical sliding contact area of joint bearing, the tilt angle is large, but also because most of the joint bearing adopted process special processing methods, such as surface phosphating, galvanized, chrome plated or outside the sliding surface lining, padded, spraying. So there is a larger load capacity and impact resistance, and has the corrosion resistance, abrasion resistance, self aligning, good lubrication or features of self lubrication lubrication free pollution, even if the installation of dislocation can work normally. Therefore, joint bearings are widely used in swing motion, the lower speed tilting motion and rotary motion.
Tel:00852 53823545
Person in charge:Mr Liu
Address:No.100,Cross Hutai road and North Hengfeng road,Zhabei District,Shanghai 200443.
In order to better provide products and services to your e-mail to usE-mail